More information

ProDG MA-12

ProDG MA-12

ProDG MA-12 er kanskje markedets tøffeste 12-tommers aktive PA-kasse for flerbruksløsninger. Låter vanvittig bra alene eller sammen med en sub i et stacket oppsett, og kan fungere glimrende som scenemonitor. Et spesialtilvirket tolv tommers element fra Beyma, sammen med en meget flott diskant gir en naturlig god klangbalanse som passer alle stilarter veldig bra. Solid, europeisk konstruksjon - bygget etter stolt håndtverkstradisjon i Spania.

  • Meget naturlig klangbalanse
  • Svært dynamisk gjengivelse
  • Spiller meget høyt og rent
  • Profesjonell flerbruks-PA
  • Fungerer også som scenemonitor
  • 1200 watt forsterker (kan forsterke en passiv M12 i tillegg)


Lagerstatus: På lager

kr 24 900,00


Self-powered multipurpose system, equipped with one (1) speaker of 12" in a tuning enclosure. Ideal as sonorous reinforcement. It can be used as P.A. Frontfill, Sidefill, with or without subwoofer as portable system or permanent installation. Ideal as stage monitor for voices and instruments. The HF section has one (1) compression driver of 1" coupled to one (1) rotating diffuser 60x40.

Incorporates amplifier Pro DG Systems GT 1.2 H which allows amplify itself and another unit of M 12. passive in slave mode.

All products are proudly handcrafted in Spain:

Teknisk informasjon

Power Handling: 550 W RMS (EIA 426A Standard) / programme of 1100 W / 2200 W peak.
Nominal Impedance:
 8 Ohm
Average Sensitivity:
 99 dB/2.83V/1m (average of 150-16.000Hz wideband).
Calculated Maximum SPL: 
/ 1m 127 dB continuous / programme of 130 dB / 133 dB peak.
Frequency Range:
 +/- 3dB from 60 Hz to 18 KHz.
Nominal Directivity:
 rotating diffuser 60x40.
Low / Mid Frequency Driver:
 One (1) Beyma speaker of 12", 8 Ohm, 500 W, 254mm in diameter with high temperature, glass fiber voice coil.
High Frequency Driver:
 One (1) Beyma driver of 1”, 8 Ohm, 50 W, 25.4 mm exit (34.44 mm) with voice coil meilar diaphragm.
Recommended Amplifier:
 Pro DG Systems GT 1.2 H, into the cabinet.
Rigging points:
 9 x M8
 2 X XLR + 1 NL4MP speakon connectors. USB-Ethernet + 2 X Powercom.
Acoustic Box:
 CNC model, 18 and 15mm made from birch wood plated on the exterior.
 Standard black paint job.
Box Dimensions:
 (HxWxD); 605x360x335mm (23,82”x14,17”x13,19”).
 20,3 Kg (44,75 lbs) net weight / 21,5 Kg (47,40 lbs) gross weight with packaging.

Output power
per channel2 x 350 W @ 8 Ω 2 x 600 W @ 4 Ω Output power bridge mode 1200 W @ 4 Ω

Output Circuitry UMAC™ Class D - full bandwith PWM modulator with ultra low distortion
Output Voltage 70 Vp / 140 Vpp (unloaded) / Bridged 140 Vp / 280 Vpp (unloaded)
Amplifier Gain 26 dB
Signal To Noise-Ratio 
> 119 dB (A-weighted, 20 Hz - 20 kHz, 8 Ω load)

THD+N (typical) < 0.05 % (20 Hz - 20 kHz, 8 Ω load, 3 dB below rated power)
Frequency Response 20 Hz - 20 kHz ± 0.15 dB (8 Ω load, 1 dB below rated power)
Damping Factor > 900 (8 Ω load, 1 kHz and below)
Protection Circuits Short circuit protection, DC protection, under voltage protection, temperature protection, overload protection
Readouts for DSP/Network Protect/Disable (mute), Heatsink temperature, Clip (for each channel)
Power Supply UREC™ universal mains switch mode power supply with Power Factor Correction (PFC) and integral standby converter
Operation Voltage Universal Mains, 85-265VAux. Power for DSP ±15 V (100 mA), +7.5 V (500 mA)
Standby Consumption < 1 W (Green Energy Star compliant)
Dimensions (HxWxD) 105 x 296 x 105 mm / 4.13 x 11.65 x 4,13 in
Weight 1,28 Kg / 2.82 lbs

Du er kanskje også interessert i følgende produkt(er)