Kategorier

More information

Tascam DR-60D mkII

Tascam DR-60D mkII

Tascam slipper en oppgradert versjon av sin 4-spors opptaker med XLR-innganger for DSLR-kameraer. Tascams DR-60D mkII er en ny lydopptaker for film- og videoskapere som benytter DSLR-kameraer til levende bilde. I en årrekke har filmskapere testet ut forskjellige måter å ta opp lyd på – og forsøkt å få dette til å fungere sammen med kameraløsninger som originalt er utviklet for å fungere til billedtagning. Tascam er med sin nye DR-60D mkII svaret mange har ventet på. DR-60D mkII fungerer perfekt til alle som benytter de prisgunstige DSLR-kameraene til høykvalitets videoopptak, og er en kjærkommen løsning til aktive amatører og profesjonelle.

Lagerstatus: Utsolgt

Vanlig pris kr 2 350,00

Tilbud kr 1 699,00

Detaljer

DSLR-kamerear blir i dag benyttet til å gjøre høykvalitets videoinnspillinger - både av profesjonelle og av aktive amatører. Nå leverer Tascam "the missing link" for alle disse brukerne.

Tascams DR-60DmkII er generasjon to av Tascams lydopptaker for film- og videoskapere som benytter DSLR-kameraer til levende bilde. I en årrekke har filmskapere testet ut forskjellige måter å ta opp lyd på – og forsøkt å få dette til å fungere sammen med kameraløsninger som originalt er utviklet for å fungere til billedtagning. Tascam er med sin nye DR-60DmkII svaret mange har ventet på. DR-60D fungerer perfekt til alle som benytter de prisgunstige DSLR-kameraene til høykvalitets videoopptak, og er en kjærkommen løsning til aktive amatører og profesjonelle. DR-60D er en 4-spors ”solid-state recorder” og benytter utskiftbare media-kort slik som SD og SDHC. Her er det ingen slitedeler som ikke tåler et aktivt bruk, og hele løsningen er svært solid og robust oppbygget.

Tascams nyeste og kvalitetsmessig beste forforsterkere er benyttet (såkalt HDDA pre-amps), og med påkostede AD/DA-konvertere er du sikret de aller beste opptakene, og kan koble til dine beste mikrofoner for den optimale lydkvalitet. I versjon 2 får du hele 64dB gain, noe som skal være nok for selv de mest tungdrevne kameramikrofoner. Enheten er passer perfekt under kameraet ditt. Håndstøy fra DR-60D er nærmest eliminert da den har lekre ”soft touch” knapper og datahjul. Selve brukergrensesnittet er også enkel å betjene, slik at alle skal kunne nyttiggjøre seg av funksjoner som Auto Record og Tascams ”Dual Record Safety Track Mode”, en funksjon som tar opp to stereo-spor, hvor det ene stereoparet alltid ligger 12dB lavere, slik at man har litt å gå på i forhold til uventede og kraftige signaler. DR-60D er helt unik på markedet, og noe alle som bruker DSLR til video-opptak bør vurdere.



Mer informasjon på Engelsk:

 

  • Compact, high-quality audio recorder designed to be used in combination with a DSLR camera
  • Uses an SD/SDHC card as recording medium
  • High-quality recording inputs through Tascam original High Definition Discrete Architecture (HDDA) microphone preamps
  • In addition to ordinary stereo recording, simultaneous recording of up to four channels is possible
  • Four channels can be mixed down to a stereo signal
  • Recording levels can be adjusted independently for inputs 1, 2 and 3–4
  • Dual recording function allows two files to be recorded simultaneously at different levels
  • Recording at 44.1/48/96 kHz, 16/24-bit, linear PCM (WAV format)
  • Broadcast Wave Format (BWF) supported as WAV recording format
  • New, smooth XLR/TRS combo jacks
  • XLR mic/line inputs can provide phantom power (+24V/+48V)
  • TRS mic/line inputs support +24 dBu input when used as line inputs
  • "HI+PLUS" setting allows a maximum input gain of 64 dB
  • Stereo mini jack input supports mics that require plug-in power, allowing the input of video mics and other high-output mics (+10 dBV maximum input level)
  • Low-cut filter conveniently reduces low-frequency noise (40 Hz, 80 Hz, 120 Hz)
  • High-quality audio can be output to a DSLR camera for recording
    • Two camera outputs with different levels allow audio signal to be sent to a line or mic input of the camera
  • Camera input enables convenient monitoring of audio from a DSLR camera
  • Selectable mid-side decoding for use with MS microphone setups
  • Slate tone functions (automatic/manual) to simplify synchronization with video files when editing
  • Pre-recording function allows the unit to record the two seconds of sound before recording is activated
  • Auto recording function to start start and stop recording by input level
  • A new file can be created during recording (manually or by file size)
  • Self-timer function to start recording after a set period of time
  • Jump-back function allows the last several seconds of the currently played file to be replayed again by simply pressing a button
  • Selectable delay to eliminate time lags caused by differences in the distances of two input sources
  • QUICK button allows easy access to various functions
  • Divide function allows files to be split where desired
  • Mark function convenient for moving to specific locations
  • Equalizers for playback, and level alignment function to enhance the perceived overall sound pressure
  • File name format can be set to use a user-defined word or the date
  • Resume function to memorize the playback position before the unit is turned off
  • Line output and headphones output with individual level controls (3.5-mm jack)
  • 128 x 64 pixel LC display with backlight
  • USB 2.0 port
  • Stand adapter (¼ inch) on bottom side to attach the unit to a tripod
  • DSLR bracket for easy camera attachment and removal with a coin
  • Dedicated remote control jack (for use with RC-10 and RC-3F (sold separately))
  • Hold switch to prevent accidental operation
  • Handles on the front left and right sides protect the screen and can be used to attach a shoulder belt
  • Operates on four AA batteries, an AC adaptor (sold separately: TASCAM PS-P515U), external battery pack (sold separately: TASCAM BP-6AA) or USB bus power
  • Power source switches automatically from external to internal when necessary (with pop-up message on display)

    Notes in red are new functions of the DR60mkII

 


The DR-60D MKII is a compact 4-track audio recorder for dedicated use with a digital single-lens reflex (DSLR) or digital single-lens mirrorless (DSLM) camera as a video system. It can be mounted directly to the camera and offers various audio inputs and outputs to allow the recording of high-resolution audio material in parallel to, but separated from the camera and its video data.

The recorder features Tascam original HDDA microphone preamps which are known for high S/N ratio, low input-referred noise and low distortion. Recordings can be made at 44.1/48/96 kHz, 16/24-bit in WAV or BWF format. In addition to ordinary stereo recording, it is possible to record up to four channels simultaneously which can then be mixed down to a stereo signal. Recording levels can be adjusted independently for inputs 1, 2 and 3–4 and the Dual Recording function allows two files to be recorded in parallel at different levels.

The DR-60D MKII can output high-quality audio to a DSLR/DSLM camera to be recorded there as a reference track, and a camera input enables convenient monitoring of audio sent from a DSLR camera. Mid-side decoding, slate tone functions (automatic/manual), selectable time delay and other functions for convenient recording are also available.


High-Quality HDDA(High Definition Discrete Architecture) Mic Preamps

High quality mic preamps are a necessity for high-grade sound. The DR-60D's HDDA mic preamplifirers utilize discrete circuitry and premium parts approved after months of evaluation tests. The HDDA s circuit achieves an incredibly high EIN (-120dBu).
In addition, CIRRUS LOGIC's AD converter (made famous on the DR-40 linear PCM recorder) is installed to ensure high-lineality recording from any input signal

4 Inputs, 3 Outputs and Simultaneous 4 Track Recording with Mixer Controls Built-In
The DR-60D can record up to 4-tracks simultaneously allowing for various mic set-ups. Inputs 1/L and 2/R can be selected for monaural operation or stereo link operation. There are 3 outputs at one's disposal. A CAMERA OUT for reference track recording to the camera, LINE OUT to run to a mixer, and a Headphone Out for direct monitoring. (In 4CH mode, 1/L and 2/R inputs cannot be selected for monaural operation.)
The DR-60D supplies mixing functionality to all 4 tracks. Adjust PAN, Level, Limiters, HPF (40/80/120Hz) and Delay easily from the user-friendly set-up. TASCAM is well known for having the easiest to use controls in the market. The DR-60D is ready to use right out of the box with its external, non-menu-intensive controls.

Multiple Record Modes (Including Dual "Safety Track" Record Mode) for Self-Tailored Recording
The DR-60D can be tailored further to one's recording needs with the various record modes. Choose between:

MONO/DUAL MONO mode:These modes are ideal for single source shooting STEREO/DUAL STEREO mode:These modes are ideal for shooting with a stereo or mid-side microphone
4CH mode:This mode is ideal for all-around movie shooting. For example, you can record two sources separately plus one stereo microphone all simultaneously.

DUAL MONO and DUAL STEREO mode automatically provide a back-up safety track in case the initial levels where set too high and clips/peaks were encountered. The safety track can be set to record from -6dB to -12dB lower than the initial take.

Soft-Touch Keys to Eliminate Handling Noise and Various Other Features such as the Slate Function were Designed Specifically for DSLR Use
Every aspect of the DR-60D is designed specifically for DSLR Audio for Video Recording. The keys of the unit are designed specifically for quiet operation to eliminate handling noise. The Slate feature is designed to mark tracks easily while in production. The input and output layout is designed for versatile use. Whether the device is used under a camera, on a rig or strapped around a solitary sound engineer, TASCAM's DR-60D will meet all on-site audio production needs.

 

Convenient Features Ideal for DSLR Shooting

 
Dedicated CAMERA OUT Provides Simultaneous Recording between DSLR and the DR-60D
The CAMERA OUT connector outputs the sound mixed internally on the DR-60D. This output is equipped with an adjustable level control dial due to the lack of input level control on most DSLR's. This ensures a quality reference track is recorded onto your camera. Everything being recorded to the SD card can be sent to the camera - including slate tones - to make sync easier.

Versatile Slate Tone Generator Provides Easy-Adjustments for On-Site Movie Editing

The internal slate tone generator produces various tones for easy track making and recognition. Slate tones can be generated from 2 operation modes;

Automatic:OFF/HEAD(rec start)/HEAD+TAIL(rec start and end) (You can select duration of the slate tone: 0.5/1/2/3 sec)

Manual:Push the SLATE button for tone. (In HOLD, the SLATE button is disabled for mistake prevention.) 

Channels 3 & 4 - 3.5mm Input Connector Supports High-Output Video Camera Microphones
The channels 3&4 input connector supports high-level maximum input up to +10dBV and have plug-in power available. Most video camera microphones are high-level output and equipped with a 3.5mm output connector.

Tripod Socket Placed on the Bottom and a Screw for Camera Attachment Placed on Top
The DR-60D can be placed between a DSLR Camera and a tripod, or mounted to a rig easily. In addition, the bracket of the top panel can be removed when you wish to attach the DR-60D to stabilizers.

510g Light-Weight Body Designed for Rugged Portability
The DR-60D's body was manufactured with very rigid plastic for a durable but lightweight design. TASCAM understands how important weight is to ensure one is getting the right shots and steady camera movement when filmmaking. In adiition to weight, the DR-60D is extremely compact while remaining feature-rich. Only 133mm (5.25") wide, the DR-60D will not interfere with any normal camera operation. Also, all batteries can be replaced without removing the device from the Camera or tripod / rig.

 

 

Optional remote controller

 

This unit has a REMOTE jack for connecting a TASCAM RC-3F footswitch-type remote control or TASCAM RC-10 wired remote control (both sold separetely) that can be used to operate the unit.

RC-3F

Teknisk informasjon

General
Recording media   SD card (64 MB – 2 GB)
SDHC card (4–32 GB)
Audio file compatibility   WAV: 44.1/48/96 kHz, 16/24-bit
BWF (Broadcast Wave Format): 44.1/48/96kHz, 16/24-bit
Number of channels   4 channels (stereo x 2)
Analogue audio inputs and outputs
Mic/Line input 1/L, 2/R (switchable phantom power)   XLR-3-31
6.3-mm standard TRS Jack
Input switch set to MIC or MIC+PHANTOM    
Input impedance   2 kOhm
  Phantom Power   48 V ±4 V (10 mA/channel) or
24 V ±4 V (10 mA/channel)
  Maximum input level   0 dBu
  Minimum input level   −72 dBu
  Mic input gain (input level knob at maximum)   LOW: +11 dB
MID: +36 dB
HIGH: +52 dB
HIGH+PLUS: +64 dB
Input switch set to LINE    
Input impedance   10 kOhm or higher
  Nominal input level   +4 dBu
  Maximum input level   +24 dBu
Mic/Line input 3-4 (supports plug-in power)   3.5-mm stereo mini jack
Input impedance   10 kOhm
  Maximum input level   +10 dBV
  Minimum input level   −50 dBV
  Mic input gain (input level knob at maximum)   LOW: +3 dB
HIGH: +26 dB
HIGH+PLUS: +38 dB
CAMERA IN jack   3.5-mm stereo mini jack
Input impedance   10 kOhm
  Nominal input level   −10 dBV
  Maximum input level   +6 dBV
CAMERA OUT (LOW) jack   3.5-mm stereo mini jack
  Output impedance   200 Ohm
  Nominal output level   −50 dBV
  Maximum output level   −30 dBV
Headphones output   3.5-mm stereo mini jack
  Maximum output power   50 mW + 50 mW
CAMERA OUT (HIGH)/LINE OUT jack   3.5-mm stereo mini jack
  Output impedance   200 Ohm
  Nominal output level   −10 dBV
  Maximum output level   +10 dBV
Other inputs and outputs
USB   USB Mini-B Type
  Format   USB 2.0 HIGH SPEED mass storage class
REMOTE jack   2.5-mm TRS jack
Audio performance
Frequency response   20 Hz – 20 kHz, +0.5/–2 dB (LINE IN or MIC IN to LINE OUT, Fs 44.1/48 kHz, JEITA)
20 Hz – 40 kHz, +0.5/–3 dB (LINE IN or MIC IN to LINE OUT, Fs 96 kHz, JEITA)
Distortion   0.02% or less (LINE IN or MIC IN to LINE OUT, Fs 44.1/48/96 kHz, JEITA)
S/N ratio   92 dB or more (LINE IN or MIC IN to LINE OUT, Fs 44.1/48/96 kHz, JEITA)
Equivalent input noise   –120 dBu or less
Note for JEITA   Conforming to JEITA CP-2150
Computer compatibility
Windows   Pentium 300 MHz or faster
128 MB or more memory
Macintosh   Power PC, iMac, G3, G4 266 MHz or faster
64 MB or more memory
Recommended USB port   USB 2.0
Recommended USB host controller   Intel chipset
Supported operating systems   Windows XP, Windows Vista, Windows 7, Windows 8 (including Windows 8.1), Mac OS X 10.2 or later
Power supply and other specifications
Power supply   Four AA batteries (Alkaline or Ni-MH)
USB bus power supplied from a computer
AC adaptor (TASCAM PS-P515U, sold separately)
External battery pack (TASCAM BP-6AA, sold separately)
Power consumption   5.4 W (maximum)
Dimensions (W × H × D)   133 mm × 93 mm × 78 mm (with the top adapter attached)
Weight   510 g (without batteries)
Operating temperature range   0–40 °C