Kategorier

More information

Tascam VL-S5 (par)

Tascam VL-S5 (par)

Den nye generasjonen "entry-level" studiomonitorer fra Tascam har fått flere forbedringer fra VL-serien. Bass-elementet er nå utviklet i Kevlar, og forsterkeren har nå 40 + 30 watt kraft for henholdsvis bass- og diskant-element. Tascam har spesialutviklet et nytt delefilter, som deler på 3,2kHz noe som medfører at kritiske faseutfordringer flyttes lenger unna de mest ømfintlige mellomtonefrekvensene. Totalt har den et frekvensomfang på 60Hz til 22kHz, og til prisen må VL-S5 ses på som et svært godt lydmessig kjøp.

NB! Pris er pr par!!!

Lagerstatus: På lager

Vanlig pris kr 2 950,00

Tilbud kr 2 280,00

ELLER

Detaljer

The VL-S5 is the successor of TASCAM's popular range of high-quality studio monitors like the VL-X5. Designed for the needs of home studios, it works well with audio interfaces such as our US-2x2 and US-4x4.

The design of the VL-S5 creates a high-resolution stereo monitoring system in any environment, You immediately notice the seamless, natural response delivered by the Kevlar woofers and 1" silk dome tweeters. Each component is driven by a separate amplifier, and a crossover frequency of 3.2kHz maximizes the efficiency of both drivers while moving phase issues out of the critical midrange. The system delivers even frequency reproduction from 60Hz – 22kHz.

Balanced input connections reduce noise and interface with professional components. For reliable mix playback at an affordable price, there's no better choice than TASCAM's VL-S5 studio monitors.

  • 2-way Studio Reference Monitor
  • 5” curved Kevlar cone with a high-temperature voice coil and damped rubber surround
  • 1” natural silk dome tweeter
  • Magnetically shielded
  • Bi-amplified 40W + 30W power amp section
  • 60Hz – 22kHz frequency response
  • Protection circuits include: RF interference, output current limiting, over temperature, turn-on/off transient, subsonic filter, external main fuse
  • Switchable 120V/240V power
High-strength Kevlar LF cone and 1" Silk HF driver for superior, natural response
In the music production process, it is imperative to hear the audio quality of your tracks as purely as they were recorded. The VL-S5 system responds quickly to audio transients with high-quality driver components. The high-strength, heat-resistant Kevlar cone combined with the 1" silk tweeter faithfully reproduce every nuance of the original recorded track.

The Kevlar cone reproduces the full frequency spectrum without distortion. Softer materials used in other monitors can bend and deform during playback, giving you an inaccurate idea of what your mix actually sounds like. The silk dome tweeter provides accurate high end playback without the harsh, fatiguing sound typical of metal-domes designs. 

LF 40W and HF 30W Bi-amplified Power
The VL-S5 is built with transparent audio quality in mind. Each component is driven by a discrete amplifier for the cleanest possible playback. Seperate driving amplifiers also eliminate any possible electrical interaction between components – which could degrade performance.

The crossover frequency of 3.2kHz was selected after extended listening tests to ensure that seamless response is achieved. Many monitors place their crossover frequency lower around 1-2k, allowing them to use less expensive components, but this causes phase distortion in the midrange where guitars, vocals, and other critical mix elements lie. The high-quality Kevlar driver allows TASCAM to set the crossover higher without distortion for truer reproduction of rock, hip hop, EDM, acoustic, or any other music genre.

Balanced XLR / TRS input for Low Noise Connection
Electrically balanced audio connections reduce noise when interfacing audio components, especially when cable lengths are long. Noise can come from other components in the signal chain, the electrical supply to audio components, room lighting, and other sources. Noise can get mixed with signals during transmission between components on a cable, and a balanced connection can reduce or eliminate this noise. To correctly identify whether noise is caused by a previously recorded music track or the environment, noise must be excluded from the monitoring environment.

Magnetically shielded design allows safe placement near personal computers and video monitors
The VL-S5 is shielded to prevent magnetic lines of force from affecting sensitive components nearby. The highly-efficient VL-S5 speaker has a powerful magnet. With magnetic shielding, it can be installed near devices which can be affected by magnetic force - such as computer displays, hard drives, and other computer components.

Teknisk informasjon

Low-frequency output 40W
High-frequency output 30W
Speaker unit  
Woofer 5.25 inch
Tweeter 1 inch
Enclosure format Magnetically shielded
Frequency response 60Hz to 22kHz
Crossover frequency 3.2kHz
Sensitivity 200mV
Input terminal XLR Balanced, TRS Balanced / Unbalanced
Input impedance  
Balanced 20kohm
Unbalanced 10kohm
Power AC 120V-230V, 50/60Hz
Power consumption 60W
Dimensions 176 (W) × 255 (H) × 200 (D) mm
6.9 (W) × 10 (H) × 7.9 (D) inch
Weight 5.2kg / 11.5lb
Accessories AC cable, Owner's Manual (including warranty)

Du er kanskje også interessert i følgende produkt(er)