Last ned brukermanual her.
The Fredenstein Bento 6S is a compact carrying enclosure for six 500-format modules and industry standard compatible cards. Fredenstein’s advanced audio routing capabilities significantly reduce wiring complexity. Delivering +/-16Vdc at 1.6A each and +48Vdc at 0.3A, Bento 6S will work properly even with the most power demanding modules. A universal power supply (90Vac – 240Vac, 50Hz – 60Hz) makes international touring a breeze. The multi-layer backplane ensures lowest noise figures and maximum signal integrity.
In case you want, for example, route the audio signal from a mic-pre in slot 1 to an EQ in slot 2 and then to a compressor in slot 3, turn the switches located in the lower part of the back-panel between the slot 1 and 2 and slot 2 and 3 in the link position. (Please be aware that this disables the slot 2and the slot 3 input XLR connectors). Slot 1 input will be the microphone input and the slot 3 output will be the audio output of the complete chain. If you are using multiple compressors which make use of the compressor link buss (Pin 6), you can link two adjacent slots by putting the buss switch in the I position.