Kategorier

More information

Tascam RC-9010S

Tascam RC-9010S

Profesjonell styringsmodul for CD-9010 og 9010CF. Med RC9010S har du en glimrende avviklingsløsning i et profesjonelt kringkastingsmiljø for CD-plater og minnekortavspilling (CD-9010CF). Driftssikker og stabil løsning. NB! Bestillingsvare. Normalt en ukes leveringstid.

Lagerstatus: På lager

kr 32 990,00
ELLER

Detaljer

This remote control is designed to be used when connecting to the REMOTE (SERIAL) connector of a TASCAM CD-9010CF/ CD-9010 unit. By connecting this remote, you will be able to use several additional functions of the CD-9010CF/CD-9010 and be able to operate it with greater ease.

Teknisk informasjon

Supported media   CD, CD-R (CD-DA audio discs, ISO9660 Level1/Joliet/Romeo data discs)
CF card, 512 MB – 64 GB, Type I only (CD-9010CF only)
Playback file formats                                                                WAV: 44.1/48kHz, 16/24-bit
Max. file size: 2 GB (CD-9010CF only)
CD-DA: 44.1kHz, 16-bit
Number of channels   2 (stereo)
1 (mono)
Analogue audio inputs and outputs
MIX INPUTS (BALANCED)   XLR-3-31 (1: GND, 2: HOT, 3: COLD)
  Input impedance   10 kOhm
  Nominal input level   +4 dBu (1.23 Vrms)
  Maximum input level   +24 dBu (12.28 Vrms)
LINE OUTPUTS (BALANCED)   XLR-3-32 (1: GND, 2: HOT, 3: COLD)
  Output impedance   200 Ohm
  Nominal output level   +4 dBu (1.23 Vrms)
  Maximum output level   +24 dBu (12.28 Vrms)
MONITOR OUTPUTS (UNBALANCED, CD-9010 only)   RCA pin jack
  Output impedance   100 Ohm
  Nominal output level   –10 dBv (0.32 Vrms)
  Maximum output level   +6 dBv (2 Vrms)
MONITOR OUTPUTS (BALANCED, CD-9010CF only)   XLR-3-32 (1: GND, 2: HOT, 3: COLD)
  Output impedance   200 Ohm
  Nominal output level   +4 dBu (1.23 Vrms)
  Maximum output level   +24 dBu (12.28 Vrms)
PHONES   6.3-mm standard stereo jack
  Maximum output power   45 mW + 45 mW (THD+N 0.1 %, 32 Ohm)
Digital audio outputs
DIGITAL OUT (COAXIAL, CD-9010 only)                      
  RCA pin jack
  Format   IEC60958-3 (SPDIF consumer standard, when DIGITAL OUT TYPE is set to CONSUMER)
  Output impedance   75 Ohm
DIGITAL OUT (XLR, CD-9010 only)   XLR-3-31
  Format   AES3-2003/IEC60958-4 (AES/EBU, when DIGITAL OUT TYPE is set to PRO)
  Output impedance   110 Ohm
DIGITAL OUT (BNC, CD-9010CF only)   BNC
  Format   AES3-2003
AES-3id-2001
IEC60958-4 (AES/EBU)
  Output impedance   75 Ohm
Control inputs and outputs
WORD IN   BNC (switchable clock terminator)
  Input voltage   5V TTL equivalent
  Input impedance   75 Ohm
  Permissible frequency variation during ext. synch.      
  ±100 ppm
WORD THRU   BNC
  Output voltage   5V TTL equivalent
  Output impedance   75 Ohm
REMOTE IN (SERIAL)   D-sub 15-pin
REMOTE IN (PARALLEL)   D-sub 37-pin
  Maximum input voltage   +5.5 V
  High-level minimum input voltage   +3.75 V
  Low-level maximum input voltage   +1.25 V
  Output format   Open drain (max. 50 V, 100 mA)
  Low-level maximum output voltage   0.5 V
  Maximum supplied current (+5 V)   100 mA
KEYBOARD (CD-9010CF only)   USB A-type 4-pin
  Protocol   USB 1.1 Low Speed (1.5 Mbit/s)
  Maximum supplied current (+5 V)   500 mA
Audio performance
All audio performance ratings are for playback according to JEITA CP-2150 standards
Frequency response   20 Hz – 20 kHz ±0.5 dB
Distortion   0.005% or less
S/N ratio   100 dB or more
Dynamic range   95 dB or more
Channel separation                                          
  95 dB or more
Power requirements and other specifications
Power   AC 100–240 V, 50–60 Hz
Power consumption   14 W (CD-9010)
18 W (CD-9010CF)
Dimensions (width × height × depth)                             
  220 mm x 137 mm x 385 mm
Weight   6 kg
Operating temperature range   5–35 °C
Installation angle   5° or less