Kategorier

More information

Triton Audio BIGAmp

Triton Audio BIGAmp

Triton Audio´s BIGAmp II gir et løft til alle instrumentsignaler. Plugg din elektriske bass eller gitar via BIGAmp og du vil garantert oppleve et lydsignal du ikke tidligere har hørt. BIGAmp er en av de rimeligste lydoppgraderingene du kan gjøre. Jobber du mye i studio, skal du ha med en liten BIGAmp i gig-bag'en. Riktig impedanse og korrekt signalforsterkning tidlig i lydkjeden vil gjøre underverker på ditt bass- eller gitaropptak. Og den er svært hendig på en live-scene også. I høst tilbyr Triton Audio BIGAmp med 25% prisreduksjon.

  • Klasse A JFet forsterkerkrets
  • 3db forsterkning
  • "single ended" forsterker-design
  • Balansert utgangssignal
  • høyohmig inngang (1 MOhm)
  • Gir deg mer headroom
  • 24-48V fantomspenning

Lagerstatus: På lager

kr 870,00
ELLER

Detaljer

Philosophy
BigAmp is a small sized, high quality jfet instrument preamp which performs equally well on stage as it does in a studio environment. It has a 1/4" female trs input which accepts signals ranging from the pickup of an electric bass or (acoustic) guitar to the line level output of a synthesizer. BigAmp's low noise class A amplifier provides high end amplification and converts the instrument output signal from unbalanced to balanced.

DAW Recording
BigAmp is an ideal companion for DAW recording. By recording a clean signal directly to disk you have the advantage of being able to sculpt the sound of your recorded track with your favourite plugins.


How it works
Stick BigAmp on a microphone cable, plug in your electric Guitar, Bass(or any other instrument with a 1/4" TRS Jack output) and switch on Phantom Power.
To achieve the best sonic result it is advised to use a short TRS/Jack cable between BigAmp and your instrument. BigAmp goes directly into a balanced input of your mixing desk, it can also be used as a frontend for your microphone-pre or channel strip in a (home)studio setup. BigAmp matches the high impedance unbalanced output of your guitar with the balanced low impedance input of a mixing desk/microphone-pre.

Teknisk informasjon

  • Ultra low noise Class A JFet amplifier
  • 3 db amplification (@ 1000 ohm load)
  • single ended amplifier topology
  • 24-48 v phantom power

Du er kanskje også interessert i følgende produkt(er)