Tascam TrackPack 1x2

En flott startpakke med Tascam's minste USB-lydkort (US-1x2), samt TH-02 (lukket hodetelefon) og TM-180 (studiomikrofon). Den medfølgende Cubase programvaren gjør at du kan produsere musikk umiddelbart etter at kortet er installert på en PC eller Mac og programvaren installert. Kabel og bordstativ til mikrofon er også inkludert i pakken. US1x2 har en god mikrofoninngang, og dette er en flott løsning enten du vil ha ditt første hjemmestudio, eller man trenger et ultrakompakt låtskriveroppsett i et profesjonelt miljø. De større lydkortene brukes av profesjonelle brukere og flere kringkastingsinstitusjoner, men selv om US-1x2 er liten, er samme grunnkvalitet benyttet på komponentnivå.

En høykvalitets Ultra-HDDA (High Definition Discrete Architecture) mikrofoninngang
Støtter innspilling opp til 96 kHz / 24 bit og støtte for Windows, Mac og iOS operativsystemer
Pakken inkluderer TM-180 kondensatormikrofon og TH-02 hodetelefon
USB 2.0 - og ingen lytte-forsinkelse
US1x2 kan også brukes til iOS-enheter med riktig lightning-adapter

Lagerstatus: På lager

Vanlig pris kr 3 280,00

Tilbud kr 2 799,00

Antall

ELLER

Legg i ønskelisten

Detaljer

The newest member of TASCAM's US series of USB 2 recording interfaces, the US-1x2 delivers 24-bit, 96 kHz desktop recording at an amazingly low price point. Suitable for singer/songwriters, podcasters, and small home studios, the compact US-1x2 interface is highly portable and can be USB bus-powered for mobile operation with a Mac or Windows laptop. A secondary 5 VDC mini-USB power input is provided for iOS devices and for standalone operation in practice sessions.

The US-1x2 sports Ultra-HDDA mic preamp which uses discrete components and features an impressive -125 dBu EIN rating and 101 dB signal-to-noise ratio. The preamp's 57 dB gain range and the interface's switchable +48V phantom power make the US-1x2 usable with almost any type of microphone, including dynamic, condenser, or ribbon mics.

Input 2 can be switched between front- and rear-panel jacks. The front panel boasts a switchable, 1/4-inch line/instrument input that enables recording a mono line-level signal (say, from a synth or mixer) or capturing a guitar or electric bass without needing a direct box. On the unit's rear, a pair of RCA line inputs admit signals from stereo consumer audio devices, such as tape decks and media players.

A recording environment with low noise and great audio performance is a relevant factor for vocal and, in particular, wind instruments. The US-1x2 features an Ultra-HDDA microphone preamplifier with an EIN figure of –127 dBu. This very low noise level makes this interface the ideal tool for recording with condenser microphones. You can also plug in your electric guitar or bass directly using the line/instrument input and use plug-in effects on your computer recording (DAW) software. Or connect any instrument amplifier’s line output to the line input of the US-1x2.

The US-1x2 is also a great tool for composing on the road. Combine it with an iPad and you can record your ideas with high quality wherever you go. Even if you’re not so familiar with recording equipment, the US-1x2’s user-friendly design enables you to use it right away.

Highlights

Ultra-HDDA mic preamp
Equivalent input noise: –127 dBu
Overall S/N ratio: 100 dB
Separate inputs for mics and instruments / line level sources
Separate controls for line and headphones outputs
Zero-latency monitoring

TM-180 Studio-microphone:
The TM-180 is a large-diaphragm condenser microphone that brings warmth and brightness to your home or project studio recordings. It offers a wide frequency response for precise and smooth reproduction of vocals, acoustic string instruments, brass instruments and other sound sources. A switchable low-cut filter allows you to add clarity by reducing the amount of unwanted low-frequency sounds or to compensate for the proximity effect in close miking. There is also a switchable level attenuation that reduces the risk of distortion caused by excessively loud sounds. And the cardioid directivity pattern enables the TM-180 to pick up the intended source while rejecting off-axis sounds.

TH-02 closed-back headphones:
TH-02 are closed-back, stylish headphones that deliver a sound you have to hear to believe, and at a price you can’t ignore. Tascam spent over a year comparing technologies, designs and methods to provide you with an amazing product for less than a third of the usual cost. The TH-02 headphones can easily be a part of your everyday accessories but also fit into your recording or performing workflow. Truly listen to the details of your music and media while enjoying comfort and flexibility. With the TH-02 headphones, Tascam (as always) has delivered first-class quality, style and design at a price everyone can appreciate. Pick one up today and find out for yourself.

Teknisk informasjon

General
Sampling frequencies		44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
Quantization bit depth		16/24 bits

Analogue audio inputs
Mic input (balanced, IN1)		XLR-3-31 (1: GND, 2: HOT, 3: COLD)
Input impedance		2.4 kΩ
Nominal input level (gain knob at max.)		−65 dBu (0.0004 Vrms)
Nominal input level (gain knob at min.)		−8 dBu (0.0775 Vrms)
Maximum input level		+8 dBu (1.9467 Vrms)
Maximum gain		57 dB
Line/instrument input (balanced/unbalanced, IN2)		6.3-mm standard TRS stereo jack (Tip: HOT, Ring: COLD, Sleeve: GND)
When set to LINE (balanced)
Input impedance		10 kΩ
Nominal input level (gain knob at max.)		−41 dBu (0.0069 Vrms)
Nominal input level (gain knob at max.)		+4 dBu (1.228 Vrms)
Maximum input level		+20 dBu (7.75 Vrms)
Maximum gain		45 dB
When set to INST (unbalanced)
Input impedance		≥1 MΩ
Nominal input level (gain knob at max.)		−51 dBV (0.0028 Vrms)
Nominal input level (gain knob at max.)		–6 dBV (0.5015 Vrms)
Maximum input level		+4 dBV (1.584 Vrms)
Maximum gain		45 dB
Line input L/R (unbalanced)		RCA
Input impedance		10 kΩ
Maximum input level		+10 dBV (3.162 Vrms)

Analogue audio outputs
Line output L/R (unbalanced)		RCA
Output impedance		100 Ω
Maximum output level		+6 dBV (1.995 Vrms)
Headphones output		6.3-mm standard stereo jack
Maximum output power		18 mW + 18 mW or higher (THD+N 0.1% or less, 32 Ω)

Other inputs and outputs
USB		4-pin USB B-type
Transfer rate		USB 2.0 Hi-speed (480 Mbits/s)
Power supply (DC IN 5V)		USB Micro B type

Audio performance
Mic preamp EIN (equivalent input noise)		−127 dBu or less (150 Ω termination, gain knob at max.)
Frequency response (input to line or headphones* output)
44.1/48 kHz		20 Hz: +0/−0.5 dB (JEITA) 20 kHz: +0/–0.5 dB (JEITA) 20 kHz: +0/–1 dB* (JEITA)
88.2/96 kHz		20 Hz: +0/−0.5 dB (JEITA) 40 kHz: +0/−1.0 dB (JEITA) 40 kHz: +0/–3.0 dB* (JEITA)
S/N ratio		100 dB or higher (22-kHz LPF, A-weighted, line input to line output, gain knob at min., standalone mode, JEITA)
Distortion		0.006 % or less (1-kHz sine wave, line input to line output, rated input level, max. output level, standalone mode, JEITA)
Crosstalk		95 dB or more (1-kHz sine wave, line input to line output, standalone mode, JEITA)

Host computer requirements
Windows
Supported operating systems		Windows 10, 32 bits or 64 bits Windows 8.1, 32 bits or 64 bits Windows 7, 32 bits or 64 bits, SP1 or later
Computer hardware requirements		Windows-compatible computer with a USB 2.0 port
CPU/processor speed		2 GHz or faster dual core processor (x86)
Memory		2 GB or more
Supported audio drivers		ASIO 2.0, WDM
Mac
Supported operating systems		macOS Sierra (10.12 or later) OS X El Capitan (10.11 or later) OS X Yosemite (10.10 or later)
Computer hardware requirements		Mac with a USB 2.0 port
CPU/processor speed		2 GHz or faster dual core processor
Memory		2 GB or more
Supported audio driver		Core Audio
iOS device		iOS device running iOS 7 or later
Supported audio driver		Core Audio for iPhone

Power supply and other specifications
Power supply
Used with a computer		USB bus power
Used with an iOS device		USB power adapter (that can supply 5 V and a current of at least 700 mA)¹ External battery pack (that can supply 5 V and a current of at least 700 mA)²
Power consumption		2.5 W
Dimensions (H × W × D, without protrusions)		146 mm × 55 mm × 120 mm
Weight		623 g
Operating temperature range		5–35 °C
¹ We strongly recommend using a Tascam PS-P520E or the USB power adapter included with the iPad/iPhone. No USB power adapter is included with an iPod Touch. To use it with an iPod Touch, purchase a genuine Apple USB power adapter (that can supply 5 V and a current of at least 700 mA) separately.
² We strongly recommend using a Tascam BP-6AA external battery pack. If using another external battery pack or mobile battery, purchase one that can supply 5 V and a current of at least 700 mA.