Kategorier

More information

IGS DTL Double Triode Limiter

IGS DTL Double Triode Limiter

IGS sin DTL er en fleksibel to-kanal mikrofonforforsterker, som takler alt fra signalsvake båndmikrofoner til rørmikrofoner og kondensatorer. I tillegg til mikrofonforsterkningen får du en utrolig vellydende limiter, slik at du kan ta opp signalene dine med noe mer nivå enn man vanligvis ville tatt sjansen på. Spesielt på vokalopptak utmerker DTL´en seg - men prøv den gjerne på en tromme-buss også. Limiter-kretsen gir et fint pådrag av snert og "brightness", og holder signalet ditt på trygg avstand til å overstyre konverteren din. DTL er håndbygget i Katovice i Polen, og holder meget høy kvalitet på komponenter, knapper og potmetere. Alt i alt et utsøkt stykke ingeniørkunst.

Lagerstatus: På lager

kr 17 599,00
ELLER

Detaljer

The preamp:
The DTL is a tube microphone preamp adapted to work with any type of microphone. A wide range of amplification makes it possible to record drums as well as the quietest ribbon microphone. DTL does a great job of recording tracks from external devices such as synthesizers or drums machines (like Akai MPC). Great results are achieved with reamping tracks from DAWs. The DTL adds a nice tube saturation to the sound. The high impendance inputs (HiZ) allow for connecting an electric or bass guitar directly into the grid of the first step of amplification (Typical HiZ solution).

The limiter:
Additional device capabilities are activated by the Limiter section. This can be used to limit peak levels of the input signal. The component in charge of compression is an IGS Audio custom designed photocell. When the limiter is working it is indicated by a LED labeled “Limit” on the front panel. The limiter controls the louder parts of the signal and prevents from the digital clipping at the inputs of you ADC. Another trick could be using the DTL as a drum compressor or mix buss compressor. It can improve the overall dynamics of the mix and give it a brighter sound. This is a very versatile device for audio processing.

The audio path of the preamp is a two stage tube amplifier with individual drive on both steps. The saturation at the first step depends on the input signal level (with possibility to use Pad -20dB). The saturation of the second step is dependent on the Output regulator. Inputs and outputs are balanced with Sowter (UK) and Edcor (USA) transformers. The anode voltage is set close to 300V DC. For each of the channels Output and Limiter threshold can be regulated smoothly. The featured switches are: GAIN, +48V, Mic/HiZ, Phase, Pad -20dB. Hi-Z inputs are located on the front panel. The meters show output signal level.

The Double Triode Limiter (DTL) is more than classic tube triode microphone preamp. The old-fashioned design was upgraded with a musical opto-limiter. The limiter is based on circuit used in 60’s and 70’s.

Teknisk informasjon

  • Inputs: 2 Mic/Line XLR and 2 HiZ Jacks on the front
  • Outputs: 2 balanced XLR
  • Tube Only audio path
  • Operating Level +4dB
  • Maximum Output +29 dBV,
  • Meters reads Output VU,
  • Max. Limiter Reduction 18dB
  • Gain Boost 60dB
  • THD < 0.1% @ 1Khz
  • S/N Ratio: 104dB
  • Power consumption: 80 watts
  • Soft Start Power Tube Timer
  • Shipping weight: 8 kilos

Du er kanskje også interessert i følgende produkt(er)