Kategorier

More information

Tascam DR-100 mkIII

Tascam DR-100 mkIII

TASCAM med tredje generasjon av sin toppmodell i klassen for håndholdte opptakere gir med DR100 mk III ennå mer profejonsell kvalitet for pengene. Med et signal til støyforhold på over 100dB er det denne opptakeren du skal ta med på kritiske opptak i felten. Robust kvalitet og glimrende lyd, er to stikkord du skal huske om DR100mkIII.

Lagerstatus: På lager

Kun 1 igjen

Vanlig pris kr 4 390,00

Tilbud kr 3 499,00

ELLER

Detaljer

TASCAM’s top-of-the-line Handheld Digital Recorder, the DR-100mkIII boasts a signal-to-noise ratio exceeding 100dB, delivering the best audio performance in the history of TASCAM portable stereo recorders. Designed to meet the needs of the most demanding audio designers and engineers, this new model combines robust reliability, an updated user interface and studio quality sonic performance to deliver a truly breathtaking audio experience.

You can record directly from the built-in uni-directional or omni-directional stereo microphones, connect your own mics to the rugged locking Amphenol XLR/TRS connectors, use a camera microphone or line source for recording or record from a digital SPDIF source. 24 or 48 volts of Phantom power on the XLR inputs are available for the use of studio condenser mics and Mid/Side microphone configurations can be decoded before or after recording. This ensures that virtually all fields of application are covered – from music, speech and atmosphere recordings to meeting minutes and live concert recordings. Many other improvements and new features as well as the multilingual menu make the DR-100MKIII an easy-to-use companion for sound recordings at the highest level.

High-quality converters
Used in a variety of combinations, depending upon the selected function, the DR-100MKIII features dual AKM AK4558 converters with VELVET SOUND architecture, providing both high sound quality and low power consumption, achieving a signal-to-noise ratio of 102 dB.The dual ADC mode uses two AK4558 AD converters in parallel. Signal-to-noise ratio is maximized and audio fidelity is improved, delivering an S/N ratio of 109 dB as compared to the (already excellent) 102 dB achieved when recording in standard mode.
Note: As the S/N ratio when recording exceeds the S/N ratio of the entire circuit, data recorded in dual mono ADC mode will be limited to an S/N ratio of 102 dB when played back on the DR-100MKIII. This does not affect the S/N ratio of the actual file, which is maintained at 109 dB.

XLR microphone inputs:
The XLR/TRS inputs, used to connect external mics, deliver the highest sound quality and lowest noise of any Tascam Handheld Digital Recorder. HDDA (High Definition Discrete Architecture) mic preamps are also included to maintain a pristine audio signal path throughout.

High samplerate for quality recordings:
The DR-100MKIII supports high-definition recording at both 96 kHz / 24 bits and 192 kHz / 24 bits, ensuring that remote recordings achieve the same sonic fidelity as their studio-born counterparts.

Redundant power supply for long-term operation
With a dual battery structure that allows the built-in high-capacity lithium-ion battery to be used with in concert with AA batteries, operation is possible for extended periods of time. This ensures that the DR-100MKIII is ready to go when you are. Additionally, the recorder can be rapidly charged by connecting an AC adapter and even support USB Bus power from an external battery pack commonly used to charge mobile phones and tablets.

Dual Level recording helps to protect your recordings
The Dual Level Recording function simultaneously records a secondary backup file at a lower gain level than the primary recording. This safety file, recorded at a 12 dB lower level protects your recording session from unexpected volume spikes and accidental overload.

Tascam DR-100MKIII
High-precision clock ensures stability when combining recordings with other material
The precision of the built-in clock is crucial when digital recordings made on what device are to be used in conjunction with materials recorded on other devices, such as when combining digital audio and video assets. To ensure stability, the DR-100MKIII utilizes the same Temperature-Compensated Crystal Oscillator (TCXO) used in professional studio master recorders. Moreover, the TCXO is not affected by the temperature of the environment – critical for a portable device which must maintain its precision in support of high-quality recording.

Teknisk informasjon

Specifications

General
Recording media   SD card (64 MB−2 GB)
SDHC card (4−32 GB)
SDXC card (48–128 GB)
Recording/playback formats   WAV (BWF): 44.1/48/88.2/96/176.4/192 kHz, 16/24 bits
MP3: 44.1/48kHz, 128/192/256/320 Kbit/s
Number of audio channels   2 channels (stereo)
Analogue audio inputs and outputs
MIC/LINE IN jacks (XLR support phantom power)   XLR-3-31 (1: GND, 2: HOT, 3: COLD)
6.3-mm standard TRS jacks (Tip: HOT, Ring: COLD, Sleeve: GND)
When MIC input source selected    
  Maximum input level   +2 dBu (PAD on)
  Minimum input level   –70.5 dBu (PAD off)
  Input impedance   XLR: ≥2 kΩ
TRS: ≥20 kΩ
When LINE input source selected    
  Maximum input level   +24 dBu
  Nominal input level   +4 dBu
  Input impedance   ≥20 kΩ
EXT IN jack (can provide plug-in power)   3.5-mm stereo mini jack
When EXT MIC input source selected    
  Maximum input level   –2.8 dBu (PAD on)
  Minimum input level   –62.8 dBu (PAD off)
  Input impedance   ≥50 kΩ
When EXT LINE input source selected    
  Maximum input level   +6 dBV
  Nominal input level   −10 dBV
  Input impedance   ≥2 kΩ
LINE OUT jack   3.5-mm stereo mini jack
  Output impedance   200 Ω
When LINE input source selected    
  Nominal output level   –14 dBV
  Maximum output level   +6 dBV
In other situations    
  Nominal output level   –10 dBV
  Maximum output level   +6 dBV
Headphones jack   3.5-mm stereo mini jack
  Maximum output power   40 mW + 40 mW (headphones connected, 32 Ω load)
Built-in speaker   0.4 W (mono)
Digital input
DIGITAL IN connector   3.5-mm TRS jack (using dedicated conversion cable)
  Format   IEC60958-3 (SPDIF)
Other inputs and outputs
USB port   Micro-B connector
  Format   USB 2.0 HIGH SPEED mass storage class
REMOTE jack   2.5-mm TRS jack
Audio performance
Frequency response   MIC/LINE IN (MIC, PAD On) to LINE OUT
MIC/LINE IN (LINE) to LINE OUT
EXT IN (MIC, PAD On) to LINE OUT
EXT IN (LINE) to LINE OUT
  44.1/48 kHz sampling frequency (JEITA)   20 Hz − 20 kHz +0.5 dB/−1 dB
  88.2/96 kHz sampling frequency (JEITA)   20 Hz − 40 kHz +0.5 dB/−2 dB
  176.4/192 kHz sampling frequency (JEITA)   20 Hz − 80 kHz +0.5 dB/−4 dB
Distortion   MIC/LINE IN (MIC, PAD On) to LINE OUT
MIC/LINE IN (LINE, +20dBu In) to LINE OUT
EXT IN (MIC, PAD On) to LINE OUT
EXT IN (LINE) to LINE OUT
  44.1/48/88.2/96/176.4/192 kHz sampling frequency (JEITA)   ≤0.007 %
S/N ratio   MIC/LINE IN (MIC, PAD On) to LINE OUT
MIC/LINE IN (LINE) to LINE OUT
EXT IN (MIC, PAD On) to LINE OUT
EXT IN (LINE) to LINE OUT
  44.1/48/88.2/96/176.4/192 kHz sampling frequency (JEITA)   ≥102 dB
Equivalent input noise (EIN)   ≤–124 dBu
Note: based on JEITA CP-2150
Power supply and other specifications
Power supply   Built-in lithium-ion rechargeable battery
2 AA batteries (alkaline, NiMH or lithium-ion)
USB bus power from a computer
AC adapter (Tascam PS-P520E, sold separately)
Battery pack (Tascam BP-6AA, sold separately)
Power consumption   7.5 W (maximum)
Approximate battery operation time (continuous operation in hours:minutes)
Use conditions   UNI MIC (built-in directional mic) input
Phantom power unused
STEREO WAV (BWF)/44.1 kHz, 16-bit recording
  Using built-in (lithium-ion rechargeable) battery   12:00
  Using lithium batteries (Energizer Ultimate Lithium)   7:00
  Using NiMH battery (eneloop)   3:30
  Using alkaline batteries (Evolta)   2:45
Use conditions   MIC/LINE IN jack/mic input
Phantom power used (+48V, 2 × 3 mA)
STEREO WAV (BWF)/44.1 kHz 16-bit recording
  Using built-in (lithium-ion rechargeable) battery   6:00
  Using lithium-ion batteries (Energizer Ultimate Lithium)   3:30
  Using NiMH battery (eneloop)   2:15
  Using alkaline batteries (Evolta)   1:00
Charging time   By USB: about 10 hours
Using PS-P520E: about 4½ hours
Dimensions (w × h × d)   80 mm × 156 mm × 35 mm (excluding protrusions)
Weight   425 g (including batteries)
375 g (excluding batteries)
Operating temperature range   0–40 °C

Du er kanskje også interessert i følgende produkt(er)