Kategorier

More information

Tascam Series 102i

Tascam Series 102i

Tascam Series 102i er et helt nytt USB-lydkort fra Tascam.

  • Gir opp til 10 innganger og to balanserte utganger for Windows, Mac eller iOS-enheter
  • Lydkvalitet opp til 192 kHz / 24 bit
  • To analoge mikrofoninnganger med balanserte Neutrik XLR/Jack kombo-kontakter
  • Ultra-HDDA (High Definition Discrete Architecture) mikrofonforforsterker med svært lav egenstøy (EIN: –125 dBu)
  • Medfølgende software: iZotope Neutron Elements, IK Multimedia Amplitube & TRacks, samt Cubase LE

Lagerstatus: På lager

kr 3 299,00
ELLER

Detaljer

The compact SERIES 102i audio/MIDI interface is perfect for guitarists, songwriters and owners of small studios. It provides up to ten audio inputs and two audio outputs to a Mac or Windows computer or an iOS device, for recording and playback at up to 192 kHz / 24 bit and with the superb audio performance one expects from Tascam. Controllable with included custom software, this versatile USB interface is equipped with a powerful DSP input and output mixer with built-in digital reverb, compressor, phase invert and four-band EQ for each channel. Having this processor included internally eliminates all latency issues and takes the load off the computer allowing it to process the audio more efficiently. A new USB driver offers very high stability, ensuring reliable performance throughout all phases of your projects.

The two analogue mic/line/instrument combo inputs are fitted with Tascam’s transparent, natural-sounding, low-noise Ultra-HDDA mic preamps and individually switchable phantom power (+48 volt). A maximum of ten inputs (four at 192 kHz) are available when using the multi-channel optical port which can accept up to eight channels of audio input from an ADAT- or S/MUX-compatible device. The SERIES 102i also offers dual headphone outputs with dedicated level control and two balanced 6.3-mm line outputs for versatile monitoring. And you can connect your favorite MIDI devices to the rear-panel MIDI input and output to use them with your recording software. The angled tabletop design gives easy access to all front-panel controls. You can quickly adjust the monitor output level with a large front-panel Monitor knob, and use the handy Monitor Balance control to mix live input with computer playback for zero-latency overdubs.


While free, easy-to-use Tascam control software helps you manage faders, processing and routing of any audio input (analogue, optical and USB) to any audio output, the interface comes also with Steinberg Cubase LE DAW software for Windows and macOS and Cubasis LE app for iPad. With IK Multimedia AmpliTube guitar effects/modeling software and T-RackS mastering software you get the tools you need to deliver high-quality, polished recording projects. The IK Multimedia software is provided in both free standing and plug-in versions for complete, versatile recording, mixing, and mastering. After purchasing either SERIES 102i or SERIES 208i, users will be able to download the latest and complete (not the trial!) version of Neutron Elements for free. About Neutron Elements: From the makers of popular audio plug-ins like RX and Ozone, Neutron 3 is designed to bring your mix workflows into the 21st century. The completely new Neutron Elements includes 4 powerful tools for great mixes for less than the cost of a single plug-in. At $129*, it’s the easiest way to get your feet wet with all the tools Neutron has to offer, and add some serious power to your plug-in collection. It’s the easiest, most intelligent way to bring unrivaled quality and speed to your mix.

AmpliTube Tascam Edition T-Rex Tascam Edition

Teknisk informasjon

Analogue audio inputs
Mic inputs (when the input switch set to MIC/LINE)   XLR-3-31 (1: GND, 2: HOT, 3: COLD)
  Input impedance   1.5 kΩ
  Nominal input level   −63 dBu (0.00055 Vrms, gain knob max.)
−6 dBu (0.195 Vrms, gain knob min.)
  Maximum input level   +10 dBu (2.45 Vrms)
  Maximum gain   57 dB
Instrument inputs (when the input switch is set to INST)   6.3-mm standard TS jack
(Tip: HOT, Sleeve: GND)
  Input impedance   ≥1 MΩ
  Nominal input level   −63 dBV (0.0007 Vrms, gain knob max.)
−6 dBV (0.501 Vrms, gain knob min.)
  Maximum input level   +10 dBV (3.162 Vrms)
  Maximum gain   57 dB
Line inputs (when the input switch set to MIC/LINE)   6.3-mm TRS jack
(Tip: HOT, Ring: COLD, Sleeve: GND)
  Input impedance   10 kΩ
  Nominal input level   −53 dBu (0.0022 Vrms, gain knob max.)
+4 dBu (1.228 Vrms, gain knob at min.)
  Maximum input level   +24 dBu (12.282 Vrms)
  Maximum gain   57 dB
Analogue audio outputs
Line outputs (balanced)   6.3-mm TRS jack
(Tip: HOT, Ring: COLD, Sleeve: GND)
  Output impedance   230 Ω
  Nominal output level   +4 dBu (1.228 Vrms)
  Maximum output level   +20 dBu (7.75 Vrms)
Headphone outputs (PHONES)   Standard 6.3-mm stereo jack
  Maximum output power (THD+N ≤0,1 %, 32 Ω)   18 mW + 18 mW
Digital audio inputs/outputs
OPTICAL IN (S/MUX) connector(s)   Optical (JEITA RC-5720C)
  Signal format   Multi-channel optical format
(Supports S/MUX when 88.2 kHz, 96 kHz, 176.4 kHz or 192 kHz.)
Other inputs and outputs
USB   4-pin USB B-type
  Transfer rate   USB 2.0 Hi-speed (480 MBit/s)
MIDI input   5-pin DIN
  Format   Standard MIDI format
MIDI output   5-pin DIN
  Format   Standard MIDI
Audio performance
Mic amp EIN (equivalent input noise)   ≤−127 dBu
Frequency response (input to line output)    
  At 44.1/48 kHz   20 Hz – 20 kHz, +0/–1 dB (JEITA)
  At 88.2/96 kHz   20 Hz – 40 kHz, +0/–2 dB (JEITA)
  At 176.4/192 kHz   20 Hz – 80 kHz, +0/–10 dB (JEITA)
S/N ratio   ≥106 dB
(MIC/LINE input to LINE output 1-2, gain knob at minimum, JEITA)
Distortion   ≤0.005 %
(MIC/LINE input to LINE output 1-2, 1 kHz sine wave, −2 dBFS input level, MONITOR knob at maximum)
Crosstalk   ≥95 dB
(MIC/LINE input to LINE output 1-2, 1 kHz sine wave, gain knob at minimum)
Computer system requirements
Windows    
  Supported operating systems   Windows 10 32-bit
Windows 10 64-bit
Windows 8.1 32-bit
Windows 8.1 64-bit
Windows 7 32-bit SP1 or later
Windows 7 64-bit SP1 or later
(Windows Vista and Windows XP are not supported)
  Computer hardware requirements   Windows computer with a USB port that supports at least USB 2.0 or USB 3.0
  CPU/processor speed   2 GHz or faster dual core processor (x86)
  Memory   2 GB or more
Mac    
  Supported operating systems   macOS Mojave (10.14 or later)
macOS High Sierra (10.13 or later)
macOS Sierra (10.12 or later)
  Computer hardware requirements   Mac with a USB port that supports at least USB 2.0 or USB 3.0
  CPU/processor speed   2 GHz or faster dual core processor
  Memory   2 GB or more
iOS device   Apple iOS device running iOS 10 or later
Supported audio drivers   Windows: USB Audio Class 2.0, ASIO 2.2, WDM (MME), MIDI
Mac: Core Audio, Core MIDI
iOS device: Core Audio for iPhone
Power supply and other specifications
Power   DC 12 V AC adapter (PS-P1220E)
Power consumption   7.2 W
Dimensions (W × H × D)   186 mm × 65 mm × 160 mm
Weight   0.9 kg
Permissible operating temperature range   5–35 °C
General ratings
Sampling frequencies   44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz
Quantization bit depth   16/24-bit

Du er kanskje også interessert i følgende produkt(er)