Kategorier

More information

Tascam Series 8P

Tascam Series 8P

Tascam´s nye serie lydkort har fått en naturlig følgesvenn i Series 8P. Dette er en åtte-kanals mikrofonforsterker med analog kompressor i signalkjeden. Series 8P kan kobles med ADAT lightpipe digitalutgang til ADAT-porten på et Series 102- eller 208 lydkort (eller andre lydkort med digital ADAT-inngang) og øke antall mikrofoninnganger på kortet. Med Tascam´s lange og anerkjente historie med produksjon av gode studiomiksere, er det en selvfølge at dette låter kuler og krutt, bananer (!) og epleterte. Eller sagt med konservativ språkbruk: - Tascam series 8P låter utrolig fint!

Lagerstatus: På lager

kr 6 250,00
ELLER

Detaljer

With superb audio specifications and connectivity and featuring an outstanding microphone preamp, the Tascam SERIES 8p Dyna is a great choice for both studio and stage. Housed in a rugged 1U rack-mount casing, its dual S/MUX optical ports make it a perfect expansion unit for a Tascam SERIES 102i or 208i or other S/MUX-equipped audio interfaces including ADAT, or use it as a stand-alone front end. In addition to eight separate TRS outputs, the SERIES 8p Dyna also has a multi-channel balanced analogue output that connects to an BO-16DX/OUT XLR breakout box, for example. And wordclock I/O ensures perfect synchronisation when using multiple units in parallel or operating with other professional equipment.

Each microphone channel features individually switched +48V phantom power for use with condenser mics, and an easy-to-use, single-control analogue compressor with true bypass. A comprehensive display informs about signal levels, compression, overload and the current sampling rate.

A superior front end for any studio or stage:

Tascam SERIES 8p Dyna in a studio environment

Tascam has long been known for transparent, natural, ultra-low-noise preamps, and the eight excellent Tascam HDIA (High Definition Instrumentation Architecture) preamplifier circuits in the SERIES 8p Dyna are its best preamps yet: The noise level (EIN) is at –127 dBu, the THD is 0.0007%, the dynamic range is 116 dB, and the crosstalk attenuation is 119 dB. An easy-to-use, single-control analogue compressor with true bypass on each channel handles hot input signals and creates smooth audio input.

Versatile features:
With two instrument/microphone combo inputs on the front panel, you can quickly plug in mics, guitars, bass and more. Six balanced mic/line inputs grace the rear. Every microphone input has individually switched +48V phantom power for using different types of microphones such as dynamic, condenser, ribbon and vintage for proper operation and safety. It adds up to a multi-purpose front end for recording and live sound.

Dual S/MUX optical outputs on the rear of the SERIES 8p Dyna enable you to use the unit as a front-end expander for S/MUX-equipped audio interfaces, such as Tascam’s SERIES 102i and 208i, and US-20x20. ADAT is also supported for compatibility with other devices. With two S/MUX outputs, you can send all eight SERIES 8p Dyna channels at up to 96 kHz (four channels at 176.4 kHz or 192 kHz) to expand your system’s capabilities with ease. The SERIES 8p Dyna’s eight line-level analogue channel outputs are provided on both 6.3-mm balanced TRS connectors and a balanced 25-pin D-Sub connector. Route signals to interfaces, recording mixers, front-of-house consoles, and pretty much anything else. Connect its D-Sub outputs to a Tascam ML-16D or ML-32D Analogue-to-Dante converter, and it becomes a pristine front end for an audio-over-IP network.

The Tascam SERIES 8p Dyna expands your audio interface Tascam SERIES 8p Dyna in a home recording studio

Teknisk informasjon

Analogue audio inputs
Mic inputs (1–2 set to MIC/LINE, 3–8)   Combo connector, XLR-3-31 (1: GND, 2: HOT, 3: COLD)
  Input impedance   2.4 kΩ
  Nominal input level   −58 dBu (0.001 Vrms, gain knob max.)
−6 dBu (0.388 Vrms, gain knob min.)
  Maximum input level   +10 dBu (2.45 Vrms)
  Maximum gain   52 dB
Instrument inputs (1–2 set to INST)   6.3-mm standard TS jack
(Tip: HOT, Sleeve: GND)
  Input impedance   1 MΩ
  Nominal input level   −58 dBV (0.0012 Vrms, gain knob max.)
−6 dBV (0.501 Vrms, gain knob min.)
  Maximum input level   +10 dBV (3.162 Vrms)
  Maximum gain   52 dB
Line inputs (1–2 set to MIC/LINE, 3–8)   Combo connector, 6.3-mm TRS jack
(Tip: HOT, Ring: COLD, Sleeve: GND)
  Input impedance   10 kΩ
  Nominal input level   −48 dBu (0.003 Vrms, gain knob max.)
+4 dBu (1.228 Vrms, gain knob at min.)
  Maximum input level   +24 dBu (12.282 Vrms)
  Maximum gain   52 dB
Compressor   1-knob analogue compressor
  Bypass   True hardware bypass
  Compression ratio   2:1
  Threshold range   40 dB
Analogue audio outputs
Line outputs (balanced, D-sub)   25-pin DB25 connector
  Output impedance   ≤100 Ω
  Nominal output level   +4 dBu (1.228 Vrms)
  Maximum output level   +20 dBu (7.75 Vrms)
Line outputs (balanced, TRS)   6.3-mm TRS jack
(Tip: HOT, Ring: COLD, Sleeve: GND)
  Output impedance   230 Ω
  Nominal output level   +4 dBu (1.228 Vrms)
  Maximum output level   +20 dBu (7.75 Vrms)
Digital audio outputs
OPTICAL OUT (S/MUX)   2 × optical (JEITA RC-5720C)
  Signal format   Multi-channel optical format
(supports S/MUX2 at 88.2 kHz and 96 kHz and S/MUX4 at 176.4 kHz and 192 kHz)
  Output channels S/MUX (44.1/48 kHz)   A: channels 1–8
B: channels 1–8
  Output channels S/MUX2 (88.2/96 kHz)   A: channels 1–4
B: channels 5–8
  Output channels S/MUX4 (176.4/192 kHz)   A: channels 1–2
B: channels 3–4
Control inputs and outputs
Wordclock input   BNC
  Input voltage   2–5 Vpp
  Input impedance   75 Ω ±10 %
  Termination   Switchable on/off
  Permissible frequency deviation during external synchronization   ±100 ppm
Wordclock output/throughput   BNC (with OUT/THRU switch)
  Input voltage   2 Vpp (at 75 Ω load)
  Output impedance   75 Ω ±10 %
  Sampling frequencies   44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz
Audio performance
Equivalent input noise   ≤–127 dBu
Frequency response    
  Mic/line input to line output   20 Hz – 40 kHz, ±0.5 dB (JEITA)
40–80 kHz, ±5 dB (JEITA)
  Mic/line input to digital output   44.1/48 kHz: 20 Hz – 20 kHz, ±0.5 dB (JEITA)
88.2/96 kHz: 20 Hz – 40 kHz, ±0.5 dB (JEITA)
176.4/192 kHz: 20 Hz – 80 kHz, ±5 dB (JEITA)
S/N ratio    
  Mic/line/inst input to line output   ≥116 dB (GAIN knob at minimum, JEITA)
  Mic/line/inst input to digital output   ≥113 dB (44.1/48 kHz, 88.1/96 kHz)
≥111 dB (176.4/192 kHz)
Distortion    
  Mic/line input to line output   ≤0.0007%
(1 kHz sine wave, maximum input level, GAIN knob at minimum)
  Mic/line/inst input to digital output   ≤0.001%
(1 kHz sine wave, maximum input level, GAIN knob at minimum)
Crosstalk attenuation    
  Mic/line input to line output   ≥119 dB (1 kHz sine wave, GAIN knob at minimum)
  Mic/line input to digital output   ≥114 dB (1 kHz sine wave, GAIN knob at minimum)
Power supply and other specifications
Power requirements   DC 12 V via dedicated AC adapter (PS-P1230)
Dimensions (W × H × D)   482 mm × 45 mm × 229 mm
Weight   2.6 kg
Permissible operating temperature range   0–40 °C
Included accessories   AC adapter (Tascam PS-P1230 with four exchangeable plug inserts), rackmount screw kit, owner’s manual
General
Sampling frequencies   44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz
Quantization bit depth   24-bit
Audio input/output channels   8 channels

Du er kanskje også interessert i følgende produkt(er)